08.14.14 9:37 AM

We would like to begin this page by posing this question:

Do other water treatment and bottled water companies change out their coolers ‘religiously and faithfully’ every year?

We do.

This is the capstone which we will build all of our future commercial drinking water offerings.

We promise and maintain that we will change out your water cooler/ under the sink chiller/ bottle water cooler every year without fail – or we will give you your money back.

Here is our notification process for us to take action to change out your equipment:

  1. We send you an e mail (month one)
  2. We send you a post card (month two)
  3. We call and leave a message ‘on every phone number we have for you’ (month three)
  4. We send one of our technicians by your house to leave you a note ‘on your front door’ (month four)
  5. We keep careful and meticulous documentation of all of our service and actions.

If you or your water company does not change your water cooler (if you ‘or your water treatment company’ does not take action and get this equipment sanitized every year); this can happen:

08.28.14 11:30 PMe coli cooler

What is the main point of this discussion?

The area in the cooler which holds and chills the water is a chlorine free environment.  If this environment is not sanitized every year – bacteria can occur.  This is a really bad thing.

With E-Coli, coliform, bacteria, and now Ebola as a health concern; it is important to have a water treatment company that will change their coolers every year.  Boyett’s Family Rayne Water Conditioning will unequivocably change your water cooler/ water chiller and bottled water cooler if you rent your water treatment equipment from our company.  I’m just saying.  Indubitably.

This is the Process we will utilize to sanitize a Point of Use cooler before we deliver this water equipment to your home or business. The material we utilize to sanitize your water equipment is an industry accepted standard and very efficient sanitary material called Sani System Liquid Sanitizer Concentrate:

  1. Remove Cover with a drill (2 screws)
  2. Remove tank cover and lines
  3. Drain Cooler
  4. Mix Sani System
  5. Pour Sani-System in cooler and let it sit for 60 seconds at a minimum

(this image represents the front of the packet in which the Sani System Liquid Sanitizer Concentrate is contained) 


6. Drain Sani System

7. Fill Cooler and Drain Cooler

8. Fill the cooler again

9. Test the hot and cold capabilities

10. Drain the cooler

11. Clean the tank cover

12. Place the tank cover and lines back on the cooler

13. Place the cover on the cooler drill the two screws on the back of the cooler

14. Use cleaner to clean the outside of the cooler

15. Clean tray and grate

16. Wipe down the cooler and cover in plastic bag.   We transport all of our coolers in a box.

Brian Hayden Boyett BS, CWS-VI, CI